Xilinx Artix7 – Numato Lab

HSFPX002 FPGA Module

Numato Lab — Sun, 16 Aug 2020 21:22:06 +0000

HSFPX002 is an easy to use FPGA module featuring the AMD Artix 7 FPGA with total size of 24Gb DDR3 SDRAM. This board contains the AMDXC7A200T– FBG676 FPGA. Features

FPGA: AMD Artix XC7A200T in FBG676 package
DDR3: 1x8Gb DDR3 (MT41K1G8SN-125:A) & two combined 512x16Mb DDR3 (MT41K512M16HA-125:A TR)
Flash memory: 512 Mb Quadbit SPI flash memory (S25FL512SDSBHV210/IS25LP512M-RHLE)
1 x 100MHz CMOS oscillator
8 GTP lanes (up to 6.6 GT/s)
FTDI FT601 for FPGA and Host communication
Maximum IOs for user-defined purposes
—FPGA – 96 IOs

Applications

Product Prototype Development
Accelerated computing integration
Memory Intensive FPGA development
Data Acquisition
Educational tool for Schools and Universities

Mimas A7 Mini FPGA Development Board

Numato Lab — Sun, 16 Aug 2020 21:21:37 +0000

Mimas A7 Mini is an easy-to-use FPGA Development board featuring AMD Artix 7 FPGA (XC7A35T – FTG256C package) with FTDI’s FT2232H Dual-Channel USB device. It is an AMD Artix-7-based replacement and upgrade of the Mimas Spartan 6 FPGA Board. It is specially designed for the development and integration of FPGA-based accelerated features into other designs. The USB 2.0 host interface based on the popular FT2232H offers high bandwidth data transfer and board programming without the need for any external programming adapters. Features

Device: AMD Artix 7 FPGA (XC7A35T-1FTG256C)
DDR3: 2Gb DDR3 (MT41J128M16JT-125 or equivalent)
Built-in programming interface. No expensive JTAG adapters needed for programming the board
Onboard 128Mb flash memory for FPGA configuration storage and custom user data storage
High-Speed USB 2.0 interface for Onboard flash programming. FT2232H Channel B is dedicated to JTAG Programming. Channel A can be used for custom applications
100MHz CMOS oscillator
8 LEDs, 1 RGB LED, and 4 Push Buttons for user-defined purposes
FPGA configuration via JTAG and USB
Maximum IOs for user-defined purposes

---FPGA – 70 IOs (35 professionally length matched Differential Pairs) and two 2×6 Expansion Headers

Aller A7 FPGA Board with M.2 Interface

Numato Lab — Sun, 16 Aug 2020 21:20:37 +0000

Aller A7 is specifically designed for the development and integration of FPGA-based accelerated features into other larger designs, it can be used with laptops, desktops, and servers featuring standard 2280 M.2 form factor M-key slot. Nowadays, most of the new laptops come with M.2 M-key slots for NVMe storage modules and Aller can be seamlessly used with those slots. Open source PCI Express IP cores such as litepcie make the development of PCIe designs very cost-effective. Features

Device: AMD Artix 7 FPGA (XC7A200T-2FBG484I)
DDR3: 2Gb DDR3 ( MT41J128M16JT-125:K TR )
4 lane PCIe Gen2 (5 GT/s)
Flash memory: 512 Mb Quadbit SPI flash memory (S25FL512SDSBHV210/IS25LP512M-RHLE)
JTAG header for programming and debugging
100 MHZ CMOS oscillator
1 x Trusted Platform Module (AT97SC3205)
M.2 Connector Interface, M-Key
Powered from M.2 connector
1 RGB LED for custom use

Tagus – A7 PCI Express Development Board

Numato Lab — Sun, 16 Aug 2020 21:19:44 +0000

Tagus is an easy-to-use FPGA Development Board featuring AMD Artix-7 FPGA with x1 PCIe interface, Trusted Platform Module (ATXXXXXX) , Dual SFP cages, and 2Gb DDR3 SDRAM. This board features AMD XC7A200T– FBG484I FPGA. The board features Low Pin Count (LPC) high-speed FMC connector conforming to ANSI/VITA 57.1 Standard to add additional features to the board by using custom or commercial off-the-shelf daughter boards. Features

FPGA: Artix-7 XC7A200T in -2 FBG484I package
1 lane PCIe Gen2.0(5.0GT/s)
DDR3: 2Gb DDR3 (MT41J128M16HA-125:K or equivalent)
128 Mb QSPI flash memory (N25Q128A13ESE40E) for Configuration and optional data storage
USB to UART serial converter
1 x 100MHz CMOS oscillator
Maximum 68 IOs for user-defined purposes on ANSI/VITA 57.1 Standard-compliant FMC LPC connector
1x GTP lanes upto 6.6Gbps on ANSI/VITA 57.1 Standard-compliant FMC LPC connector
1 RGB LED for custom use
1x Trusted Platform Module (ATXXXXXX )
Dual SFP Cages
MicroSD adapter for bulk data storage
Onboard voltage regulators for single-power rail operation
Can be powered from a PCIe slot or an external power supply
JTAG header for programming and debugging
All differential pairs are length matched on the board

Mimas A7 FPGA Development Board

Numato Lab — Sun, 16 Aug 2020 21:19:43 +0000

Mimas A7 is a serious upgrade to our lower-cost Mimas V2 FPGA Development board. Based on Artix 7™ 50T FPGA, Mimas A7 plenty powerful as it is versatile. This FPGA Development Board follows the philosophy of offering a large variety of peripherals on a compact form factor to allow minimal external components to run and evaluate as many designs as possible. Mimas A7 is a great platform for implementing Soft processors such as Microblaze to make it a complete embedded platform. The built-in Gigabit Ethernet offers low latency high bandwidth data transfer to host. The USB 2.0 host interface based on popular FT2232H offers high bandwidth data transfer and board programming without the need for any external programming adapters. Onboard HDMI IN/OUT interfaces along with large DDR3 SDRAM makes Mimas A7 a great platform for video capture, processing, and rendering. The staple peripherals such as switches and seven-segment displays offer great value for learning, prototyping and debugging. Features

Device: AMD Artix 7 FPGA (XC7A50T-1FGG484C)
DDR3: 2Gb DDR3 (MT41J128M16HA-125 or equivalent)
FTDI FT2232H based host interface
Built-in programming interface. No expensive JTAG adapters needed for programming the board
Gigabit Ethernet
HDMI IN/OUT interfaces
HighSpeed Serial Interface (GTP) available on mini DisplayPort connectors
Onboard 128Mb flash memory for FPGA configuration storage and custom user data storage
100MHz CMOS oscillator
Micro SD card slot for memory expansion
Seven Segment Display and switches for easy learning, prototyping and debugging
FPGA configuration via JTAG and USB
80 IOs (40 professionally length matched Differential Pairs) for user-defined purposes

Neso – A7 FPGA Development Board

Numato Lab — Sun, 16 Aug 2020 21:10:45 +0000

Features

Applications

Neso is an easy to use USB FPGA module with DDR3 SDRAM featuring Xilinx Artix 7 FPGA. With the compact form factor and IO accessibility on industry standard 2.54mm (100mil) headers, Neso is a great choice for embedding FPGA, DDR3 and USB in your system with ease. With Neso, the complex parts of the design are already taken care for you so you can focus on your own application and achieve faster time to market.

Why Neso?

Designed for OEM Integration
ROHS certification available
USB, FPGA, and DDR3 in very compact form factor
Industry standard 100mil (2.54mm) headers for IO access
Built-in configuration system
Single power rail operation
Up to 140 user IOs
Length matched differential IO pairs
XoBus-Lite compatible
Documentation, Reference Designs, and KB articles